As the years roll by we still receive the odd NEW revelation concerning 911. It is an accepted fact amongst any one who has researched this event that the WTC was a highly sophisticated Demolition job and do forget the WTC 7 building that went down later on that day and it was admitted that it ‘was pulled’. We understand that alot of activity went on in the towers prior to the event and for a week end the whole security system was shut down but even so it would be a guge job the wire every floor for demolition and keep it a secret. This little story solves that problem by explianing that on these huge building they are constructed with eventual demolition in mind and have already been fitted out for demolition. Big explosions were heard deep down. Each floor was obviously charged with the spiker explosions going off about 20 stories ahead of the front and it went down faster than gravity so it did not fall down.
We haven't heard much on the GMO lately but here is something well worth while watching. A Brilliant kid taking on the big Boys. A friend called Peter G sent me this contribution which I am Happy to post. It is not a rare thing for many to call Monsanto one of the true 'evils' on this planet...What do you think???
If ever there was a time for a new direction in Australia it is NOW. We are about to loose our manufacturing Industry because our 'NON Representatives have sold us out with all their Free Trade Agreements and lack of vision for this country. We simply cannot afford to loose all three car manufacturers and associated skills and jobs. It is so sad to not even see a whimper or any attempt so stop this desecration of our great country. I do not know the policy intentions of this party but I do know there are a lot of valid comments in this article and consider it worthy of everyone's attention and invite all of us to check it out and get active before it is too late ....if it isn't already..
We would like to know a lot more about this video and the technology demonstrated in it. Maybe someone who can understand the language could translate the main points for us,
The technology, if real, is more than interesting. Peter campbell alerted me about this unit and is happy to receiver more information on this system.
A simple test used to determine the effectiveness of the JOE CELL. The fuel was turned off and the engine was idled to a stop in the normal mode and then we fitted a charged cell and timed the run out time which was greatly extended thus proving the Joe cell was effecting the running of the engine. The amazing thing in this case is that there is no vacuum to the cell but was connected through a solid aluminium connection.
Please be aware that this is just a demo for the video. Many hours of testing were carried out. It is our opinion that in this set up there are many flaws in the cell design it self and the electronics set up. We believe that Bob has developed a much improved circuit and we would be happy to link other demonstrations that show a much greater success story so please contact us as we really want a positive out come in this technology.
In the earlier years of engine development it was common for the rear cylinder to over heat and wear out quicker than the others along with very Poor fuel economy. John Bennett developed a Water by Pass System and much improved water pump for various makes and models to retrofit. John is an ace engine builder and few people know engines as well as he does. Today many of the manufacturers are using the water by pass system in various manifestations but to get the full story you can order the DVD from Nutech2000 at nutech2k@gmail.com. $20 will get you the DVD lecture by Darryl O’Bryan who worked with John for many years. You will learn a lot about engines that is often over looked.
Come on Australians when are we going to wake up! With almost all of our national assets already sold to foreign owners like Electricity, Gas, Petroleum, Water, Sewerage, Telecommunications, Rail, Banks…this is a long list isn’t it…. but it continues….. When are we (you) going to say enough is enough!
BURNING WATER FOR WELDING APPLICATIONS
Here is a good example of a useful set up for welding and cutting metal. At our Climtech meetings we have demonstrated these remarkable capabilities. Note the low flame temperature stated but when placed against a metal the reaction produces very high temperatures, enough to melt Tungston in the order of 5000 degrees.
